Journal Publications Mechanical Department:
| Name of the conference | Name of Faculty | Title of the paper | National / International | Year of publication |
|---|---|---|---|---|
| National Conference on ‘Recent Trends in Engineering & Technology 2018’ | Dr .Hemant Anandrao Mandave | Design of Jig and Fixture for drilling | National | 2018 |
| National Conference on ‘Recent Trends in Engineering & Technology 2018’ | Dr .Hemant Anandrao Mandave | Optimization of processing parameters of induction hardening of AISI 1040 steel’ | National | 2018 |
| National Conference on Recent Trends in Engineering and Technology, Quest 2K20National | Dr .Hemant Anandrao Mandave | Erichson Cupping test: A review and design | National | 2020 |
| National conference on Recent Trends in Engineering and Technology 2018 | Dr. Suresh Ramchandra Nipanikar | Effect of Process parameters on Surface roughness, cutting force and Flank wear during machining of Ti Alloys | National | 2018 |
| National conference on Recent Trends in Engineering and Technology 2018 | Dr. Suresh Ramchandra Nipanikar | Analysis of Flank Wear in Machining of Ti6Al4VELI in Dry Environment | National | 2018 |
| International Conference on Innovations and Recent Trends in Engineering | Dr. Suresh Ramchandra Nipanikar | Analysis of Machinability Indices during Turning of Ti6Al4VELI | International | 2018 |
| National Conference on Emerging Trends in Engineering Science for Future Technology | Dr. Suresh Ramchandra Nipanikar | Effect of Process Parameters during Turning of Ti6Al4V ELIin Dry abd MQL Environments | National | 2020 |
| International conference on mechanical and energy Technologies (ICMET-2019) at Galgotias college of Engineering and Technology Greater Noida, New Delhi | Dr. Pravin Laxman Jadhav | Flow characterization of straight capillary tube for CO2 and R22 refrigerant | International | 2019 |
| second International Mechanical Engineering Congress (IMEC-2019) at National Institute of Technology, Tiruchirappalli | Dr. Pravin Laxman Jadhav | Experimental study on transcritical CO2 system using a straight capillary tube | International | 2019 |
| third International conference on Advances in Mechanical Engineering (ICAME-2020-093) at SRM Institute of Science and Technology, Chennai | Dr. Pravin Laxman Jadhav | Influence of geometric and operating parameters on the flow behavior of the helical capillary tube | International | 2020 |
| 2nd International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2020) Amity university Noida, New Delhi | Dr. Pravin Laxman Jadhav | Optimization of cylindrical grinding for material removal Rate of Alloy Steel EN9 by using Taguchi Method | International | 2020 |
| International Conference on Technological Advancements in Materials Science and Manufacturing (ICTAMSM-2021) at Graphic Era (Deemed to be university) Dehradun, Uttarakhand | Dr. Pravin Laxman Jadhav | Implementation Lean Implementation of lean techniques in the packaging machine to optimize the cycle time of the machine | International | 2021 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Dr. Pravin Laxman Jadhav | Design and development of Jig | National | 2022 |
| 1st International Conference on “Advanced Intelligence and Innovations in Mechanical Sciences (AIIMS - 1.0)” SRM Institute of Science and Technology, Ramapuram Campus, Chennai-89, held on 08th April 2022. | Dr. Pravin Laxman Jadhav | Numerical Study On The Straight, Helical And Spiral | International | 2022 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Dr. Pravin Laxman Jadhav | A Comparative study on CO2 and N2O | National | 2022 |
| Future Learning Aspects of Mechanical Engineering | Dr. Pravin Laxman Jadhav | Improvement in productivity with swing grinding and gate cutting fixture | International | Aug 2022 |
| National Conference on Recent Trends in Engineering, and Technology (NCRTET 2020) | Mr. Amir Mustafa Shaikh | Design & Manufacturing of Hydraulic Operated Gas Filling Machine | National | 29-02-2020 |
| Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML-2022) at Yeshwantrao Chavan College of Engineering, Nagpur | Mr. Amir Mustafa Shaikh | CFD Simulation for Fluid Flow through a Circular Chamber by using ANSYS | International | 2022 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Mr. Amir Mustafa Shaikh | A Review on Geothermal Heating and Cooling | National | 2022 |
| National Conference on Pedagogy for Higher Education (NCPHE-2022) at MKSSS’s Cummins college of Engineering for Women, Pune | Mr. Amir Mustafa Shaikh | Evaluation of Classroom Gamification in Higher Education | National | 2022 |
| “Sustainable Growth in Commerce, Management and Social services” dated 28th April 2019 | Mr. Dayanand Ananda Ghatage | “Artificial Intelligence reshaping the Business” | International | 2019 |
| National conference on “Recent Trends in Engineering and Technology” dated 18th March 2019 | Mr. Dayanand Ananda Ghatage | “Experimental Investigation and analysis of dry EDM Process for MRR & TWR” | National | 2019 |
| National conference on “Recent Trends in Engineering and Technology” dated 18th March 2019 | Mr. Dayanand Ananda Ghatage | “Surface roughness of AISI8620 in Turning by using Ceramic Tool & Vegetable oils” | National | 2019 |
| National conference on “Recent Trends in Engineering and Technology” dated 18th March 2019 | Mr. Dayanand Ananda Ghatage | “Design and Simulation of Fuel Filler Cap” | National | 2019 |
| International conference on “Insights in Mechanical & Civil Engineering” (ICIMCE 2019) 26th & 27th April 2019 | Mr. Dayanand Ananda Ghatage | “The Evaluation of Genetic Algorithm for Metal Cutting Processes & Research Agenda” | International | 2019 |
| International Virtual Conference on Innovations in Advanced Materials Processing and Manufacturing (IAMPM-2020) | Mr. Dayanand Ananda Ghatage | Analysis of CNC Turning Process Parameters for 20MNCR5 Case Hardening Steel | International | 2020 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Mr. Dayanand Ananda Ghatage | Design & development of additive manufacturing device using Core XY mechan | National | 2022 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Mr. Dayanand Ananda Ghatage | Design & development of campus tour electric vehicle. | National | 2022 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Mr. Dayanand Ananda Ghatage | Development of universal bevel gear lapping machine | National | 2022 |
| The International Conÿerence on “Recent Advances in Materials, ManuÿacturinA and Machine LearninA (RAMMML-2022)” 26th - 27th April 2022 at Yeshwantrao Chavan ColleAe oÿ EnAineerinA, NaApur | Mr. Dayanand Ananda Ghatage | “CFD Simulation for Fluid Flow through a Circular Chamber by using ANSYS” | International | 2022 |
| National Conference on Pedagogy for Higher Education (NCPHE-2022) at MKSSS’s Cummins college of Engineering for Women, Pune | Mr. Dayanand Ananda Ghatage | Evaluation of Classroom Gamification in Higher Education | National | 2022 |
| Recent Trends in Engineering & Technology NCRTET18 | Minakshi Y. Shinde, | Scabbing rejection of manifold 380 ” | National | 2018 |
| Recent Trends in Engineering & Technology NCRTET19 | Minakshi Y. Shinde, | Optimization of CNC face milling process by using different coating inserts-A Review | National | 2019 |
| Intrenational conference on Material science and technology 2019 | Minakshi Y. Shinde, | Optimization of Process Parameters on CNC milling machine for Mild steel IS 2062:2011 E250 Gr. A with AlTiN coated tool inserts in wet condition” | International | 2019 |
| Third International conference on Advances in Mechanical Engineering (ICAME-2020-093) at SRM Institute of Science and Technology, Chennai | Prof. Sharadchandra Patil | Influence of geometric and operating parameters on the flow behavior of the helical capillary tube | International | 2020 |
| Third National conference on Recent Trends in Engineering and Technology (NCRTET 2022) at Karmaveer Bhaurao Patil College of Engineering Satara on 11th June 2022. | Prof. Sharadchandra Patil | Design and development of Jig | National | 2022 |
| Emerging trends in Engineering Design & Manufacturing ETEDM – 2022 at HIT, Chennai | Prof. Niket Malvade | Surface Roughness & Cutting forces Optimisation in Machining of Biodegradeable Magnesium Calcium alloy | National | 2022 |
| International conference on Innovations in Science Technology & Management SETI, Panhala | Prof. Niket Malvade | Modelling & Multi response optimisation of face milling process based on GRA approach | International | 2022 |
| Title of paper | Name of the author/s | Department of the teacher | Year of publication | ISBN/ISSN number | |
|---|---|---|---|---|---|
| “Improvement of Machinability Using Eco-Friendly Cutting Oil in Turning Duplex Stainless Steel” | Mr. Dayanand Aananda Ghatge | Mechanical | International Journal of Engineering Trends and Technology | 2018 | 12303-12310 ISSN 2214-7853 |
| Studies on Process Parameter of Laser Beam Welding by Taguchi Method | Mr. D.A. Ghatge | Mechanical | Journal of Innovation in Mechanical Engineering (2018): Volume 1 Issue 1: 6-8 , Volume 1 Issue 1Guru Nanak Publications, Hyderabad, Talangana, India | 2018 | |
| Review paper on Laser welding machine | Mr. D.A. Ghatge | Mechanical | International journal for research in applied science & engineering technology (IJRASET) | 2017 | IJRASET |
| EVALUATING THE PERFORMANCE OF PROCESS PARAMETERS IN ROLLER BURNISHING OF EN9 MATERIAL | Mr. D.A. Ghatge | Mechanical | International Journal of Advanced Trends in Engineering and Technology Impact Factor 5.965, Special Issue, January - 2018 | 2018 | ISSN: 2456 - 4664 |
| Process optimization for turning operation -A review | Mr. S S Patil | Mechanical | International Journal of Advanced Trends in Engineering and Technology Impact Factor 5.965, Special Issue, January - 2018 | 2017 | ISSN(online) 2456-1290 |
| Study of Capillary Tube for Transcritical CO2 System | Mr. P.L. Jadhav | Mechanical | Journal of Information ,Knowledge and Research In Mechanical Engineering | 2017 | |
| Process Optimization for Wire Electrical Discharge Machining - A Review | Mr. P.L. Jadhav | Mechanical | Journal of Advance In Science and Technology | Mar-17 | JAIST |
| “ Design, development & analysis of non-IBR vertical fire tube boiler for improving the efficiency” | Mr. D. A. Ghatge | Mechanical | International Journal of Engineering Trends & Technology (IJETT), Volume 36 number 3, June 2016. | Jun-16 | ISSN:2231-5381 |
| “ Design and development of mechanical solar tracking system” | Mr. D. A. Ghatge | Mechanical | International Journal of Advanced Engineering, Management and Science(IJAEMS), Vol-2, Issue-6, Page No:704-709, June2016. | Jun-16 | ISSN:2454-1311 |
| “ Analysis and efficiency improvement in Co-generation power plant” | Mr. D. A. Ghatge | Mechanical | International Journal of Advance Engineering and Research Development (IJAERD), Vol-3, Issue-6, June 2016. e- p-ISSN:2348-6406 | Jun-16 | ISSN:2348-4470 |
| Use of Shearing Operation for MS Bar Cutting by Pneumatic Bar Cutting Machine | Mr. D. A. Ghatge | Mechanical | International Advanced Research Journal in Science, Engineering and Technology, Vol. 4, Special Issue 1, January 2017,pg no.133-149 | Jan-17 | |
| Performance Improvement of Roller Burnishing Process– A Review | Mr. D. A. Ghatge | Mechanical | International Advanced Research Journal in Science, Engineering and Technology, Vol. 4, Special Issue 1,pg no.148-151 | January 2017 | |
| Parametric Evaluation of Melting Practice on Induction Furnace to Improve Efficiency and System Productivity of CI and SGI Foundry- A Review | Mr. D. A. Ghatge | Mechanical | International Advanced Research Journal in Science, Engineering and Technology, Vol. 4, Special Issue 1, January 2017, pg no.159-163 | Jan-17 | |
| Review of Design Optimization and Analysis of Anti Roll Bar In Automotive Vehicle | Mr. N.U. Dhumal | Mechanical | International Journal for Science and Advance Research In Technology | Jul-16 | |
| Machining of plastics-A Review | Dr. H.A. Mandave | Mechanical | International Journal of engineering Research and General Science, 2015, Vol. 3 Issue 2, Part 2, pp 577-581 | 2015 | |
| Design, manufacturing and validation of low cost, miniature acoustic chamber | Mr. M.M. Kanase, | Mechanical | Noise and Vibration Worldwide, Volume 46(7), PP 24-35,July 2015. | ISSN 0957-4565 | |
| Optimization of EDM parameters using Taguchi Method & Grey Relational Analysis for AISI 01 Die Steel | Mrs.Shinde M.Y. | Mechanical | INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES &RESEARCH TECHNOLOGY June 15 2015 | July 2015. | ISSN: 2277-9655 |
| Experimental Investigation of Process Parameters Using Molybdenum Wire on Tungsten Carbide in Wire Cut EDM | Prof. Vijay D Jadhav | Mechanical | International Journal of Manufacturing and Mechanical Engineering | 2015 | |
| Performance Evaluation Of Different Types Of Cutting Fluids In The Machining Of Hardened Steel – A Review | Prof. R.P. Waydande | Mechanical | International Journal of Mechanical and Production Engineering (IJMPE), Volume- 4, Issue-3, Mar.-2016 | 2015 | International Journal of Mechanical and Production Engineering (IJMPE |
| Study of Capillary Tube For Trans critical C System On Emerging Trends In Engineering & Technology | Prof.P.L.Jadhav | Mechanical | NCETET 2015, 24 June, 2015. | 2016 | |
| Parametric Evaluation Of Drilling Operation Of Medium Carbon Steel Using Response Surface Methodology in International Journal of Mechanical & Production Engineering | Prof. Ghatge D.A | Mechanical | International Conferenceon Advances in Engineering and Technology (ICAET) on 10th January 2016, Pune,India | 2015 | |
| Performance Evaluation Of Different Types Of Cutting Fluids In The Machining Of Hardened Steel – A Review | Prof. Ghatge D.A | Mechanical | International Journal of Mechanical and Production Engineering (IJMPE), Volume- 4, Issue-3, Mar.-2016 | 2016 | |
| Response Surface Methodology And Genetic Algorithm: An Approach For Process Parameter Optimization In Turning in International Journal of Mechanical & Production Engineering | Prof. Ghatge D.A | Mechanical | (IJMPE) Volume-4, Issue3, March 2016 | 2016 | |
| Design And Development Of Vertical Axis Wind Turbine For Generation of Electricity By Using Wind Energy From Running Vehicles | Mr. D.A Ghatge | Mechanical | Journal Of Information, Knowledge And Research In Mechanical Engineering ,ISSN 0975 – 668X, NOV 14 TO OCT 15 , VOLUME – 03, ISSUE - 02 | 2016 | ISSN 0975 – 668X |
Number of books and chapters in edited volumes/books published and papers in national/ international conference-proceedings per teacher:
Mechanical Department Books/Book Chapter publication:
| Name of Author | Title of Book/proceeding | Title of chapter | Publisher | Year of publication | ISBN/ ISSN |
|---|---|---|---|---|---|
| Mr. Dayanand A Ghatge | Springer Lecture Notes on Multidisciplinary Industrial Engineering, Advanced Manufacturing and Materials Science | “Performance Evaluation of cutting parameters for surface roughness & power consumption in turning of 904L stainless steel using vegetable oil based cutting fluids” | Springer International Publishing AG,eBook | 2018 | ISBN 978-3-319-76276-0 |
| Mr. Dayanand A Ghatge | Springer Lecture Notes on Multidisciplinary Industrial Engineering, Advanced Manufacturing and Materials Science | “Analysis of optimized roller burnishing parameters using ANSYS” | Springer International Publishing AG,eBook | 2018 | ISBN 978-3-319-76276-0 |
| Mr. Rushikesh P. Waydande | Springer Lecture Notes on Multidisciplinary Industrial Engineering, Advanced Manufacturing and Materials Science | “Performance Evaluation of cutting parameters for surface roughness & power consumption in turning of 904L stainless steel using vegetable oil based cutting fluids” | Springer International Publishing AG,eBook | 2018 | ISBN 978-3-319-76276-0 |
| Ms.Shivdas R. K. | Springer Lecture Notes on Multidisciplinary Industrial Engineering, Advanced Manufacturing and Materials Science | Operation sequence dependant part family formation of reconfigurable manufacturing system | Springer International Publishing AG,eBook | ISBN 978-3-319-76276-0 | |
| Mr. Sharadchandra Patil | Analysis & weight optimization of gravity roller conveyor system | study of elctro reheological damper for control of rotor vibration | 2017 | ||
| Mr.Amol B.Kharage | Analysis & weight optimization of gravity roller conveyor system | Analysis & weight optimization of gravity roller conveyor system | Lap Lambert Academic Publication | Oct-16 | ISBN No : 978-3-659-96886-0. |
| Mr.Rushikesh Waydande | Evaluation of Cutting Fluids for Machining of Hard to Cut Material | Evaluation of Cutting Fluids for Machining of Hard to Cut Material | Lap Lambert Academic Publication | Nov-16 | ISBN: 978-3659968891 |
| Mr.Jayant Nalawade | Value Stream Mapping From Dock to stock at Engine Manufacturing Plant | Value Stream Mapping From Dock to stock at Engine Manufacturing Plant | Lap Lambert Academic Publication | Aug-16 | ISBN: 978-3-659-94359-1 |
List of Sponsored Projects:
| Name of students | Guide Name | Project Name | Industry where field projects / Internship completed | Duration from- to- | Total No. of Students undertaking field projects / Internships |
|---|---|---|---|---|---|
| Gaikwad Aniket Krushnat Divate Krishna Pramod Jadhav Ravikumar Dasharath Jadhav Ajay Arjun |
Dr. Mandave H.A. | Design And Manufacture Of CAE Parking Lift. | Spark Industries | July 2017- March 2018 | 4 |
| Bhosale Siddhesh Ashok Gaikwad Hrushikesh Sopan Tatpuje Rohit Satish Tate Akshay Maruti |
Dr. Mandave H.A. | Drilling And Deburring Attachment For Motor Fan | Supreme Plastics Pvt. Ltd. Satara. | July 2017- March 2018 | 4 |
| Kadam Vivek Patel Sharukh Mardhekar Mayur R. Kadam Ruturaj Dhananjay |
Prof. Jadhav P.L. | Cotton Ginning Machine | NA | July 2017- March 2018 | 4 |
| Ghadge Ajay Deepak Shikalgar Naziya Mubarak Kashid Shivraj Mahesh Bankar Akshay Kisan |
Prof. Mahajan S.R. | Pneumatic Pipe Bending Machine | Jadhav Brothers Nele | July 2017- March 2018 | 4 |
| Nikalje Sujeet Prakash Patel Mohammadhusen Raju Sonwalkar Pravin Dynaneshwar Pawar Nikita R. |
Prof. Miss. Yadav A.P | Automatic Inoculation Dispenser Unit | Mutha Group Of Foundries Pvt. Ltd. Satara | July 2017- March 2018 | 4 |
| Gurav Manoj Sakharam Deshmukh Shubham Sureshrao Bhange Sanjit Shankar Waikar Ajit Sunil |
Prof. Mrs. Shinde M.Y. | Design & Manufacturing Of Tool Holder For CNC E42 | Abhijat | July 2017- March 2018 | 4 |
| Deshmukh Suraj Prabhakar Ghadge Sanket Sunil Mandvekar Shubham Vilas Shinde Prashant Raghunath |
Prof. Ghatge D. A. | 3 Tool Turret Indexing Holder For Single Spindle Automat | Abhijat Equipment Pvt Ltd Satara | July 2017- March 2018 | 4 |
| Kadam Akshay Krishnat Kadam Omkar Prakash Patil Amar Shashikant Murkute Abhijeet Ashok |
Prof. Kharage A.B. | Automatic Thermocol Cutting Machine | Pratik Engineering Works Ashta | July 2017- March 2018 | 4 |
| Gharge Mahesh Prakash Jedhe Akshay S. Kadam Uday K. |
Prof. Nalawade J.K | Human Hoist | NA | July 2017- March 2018 | 3 |
| Rathod Nakusa Bhimrao Sable Abhijeet Prakashrao Kumbhar Aditya Ashok Patole Mangesh Machhindra |
Prof. Jadhav P.L. | Design And Fabrication Of Hand Pallet | NA | July 2017- March 2018 | 4 |
| Lohar Priyanka Parshuram Shingade Nilesh Popat Yadav Harshad Rajanikant Yadav Pooja Ramchandra |
Prof. Mrs. Shinde M.Y. | Design And Manufacturing Of Fixtures | Abhijat Equip Pvt. Ltd Satara | July 2017- March 2018 | 4 |
| Sutar Santosh Prakash Zodge Prafull Sanjay Salunkhe Tushar Balkrishna |
Prof.Sawant K.H. | Brick Jaw Crushing Machine | Balaji Construction Satara | July 2017- March 2018 | 3 |
| Yadav Aishwarya Umesh Shelar Akshay Suresh Shelar Rohan Sanjay Wadettiwar Prajyot Bhaskar |
Dr. Mandave H.A. | Productivity Improvement In Shell Molding Process By Reduction Of Non Value Added Time | Mutha Founders And Siddharth Industries Pvt. Ltd. | July 2017- March 2018 | 4 |
| Kazi Azim Rafik Mane Omkar Balku Patil Anjali Anil Jadhav Ajit Manik |
Prof. Ghatge D.A. | Grinding Machine Dressing Attachment By Mechanically | Mechanite Engineering Solution M21 Plant | July 2017- March 2018 | 4 |
| Bachal Ganesh Nandkumar Mundhe Arjun P. Shelke Akshay Aba Todkar Shridhar Anandrao |
Prof. Patil S.S. | Design And Manufacturing Of Scissor Lift | Ganesh Enterprizes, L 82 Adll Midc, Satara | July 2017- March 2018 | 4 |
| Jadhav Sayli Jagannath God Sushama Uttam Ghanwat Aniket Laxman Madure Vinod Vilas |
Prof. Patil S. S. | Oil Skimmer | Ajinkyatara Sahkari Sakhar Karkhana,Shendre | July 2017- March 2018 | 4 |
| Kshirsagar Satish Shyam Budhvant Govind Pandharinath Deshmukhe Akshay Ashok Sawant Rohit Suresh |
Prof. Dhumal N.U. | Design And Developing Spring Manufacturing Machine | Spayway Fittness Private Ltd Satara | July 2017- March 2018 | 4 |
| Kudale Akshay Newase Vrushali Shende Renuka S. Shinde Chandrahar Rajaram |
Prof. Miss. Shivdas R.K | Design And Fabrication Of Semi automatic Workbench For Horizontal Drilling Machine | Atharva Enterprise | July 2017- March 2018 | 4 |
| PUROHIT AKSHAY H. PATIL OMKAR S. KITTUR KUNAL M. PHARANDE BHAGYASHRI K SABALE SHIVANI K. |
Prof. Dayanand A. Ghatge | Design and Development of Thermocol Shredding Machine | Top Gear Transmissions Pvt. Ltd. M 71, Addl. MIDC, Satara | July 2017- March 2018 | 4 |
| JADHAV NANDINI M. JOSHI NIKITA S. MAHADIK AKSHAY B. PAWAR SIDDHART D. |
Prof. Dayanand A. Ghatge | Design and Development of Surface Deburring Machine | Kavitsu Transmission Pvt. Ltd. W- 85 Addl. MIDC, Satara | July 2017- March 2018 | 4 |
| Mr. Desai Akshay Sharad Mr. Jamdar Rohit Yashwant Mr. Kenjale Akshay Balkrishna |
Prof. Sharad S. Patil | Design and manufacturing of part catcher | Abhijat Ind. Pvt. Ltd. Satara | July 2016- March 2017 | 4 |
| SAWANT SAMADHAN SHALGAR SAMRAT RAJPUT KARANSINGH RANJANE PRATHAMESH |
Prof. Pravin L. Jadhav | Manufacturing of copy turning machine | J K Industries, Addl. MIDC, Satara | July 2016- March 2017 | 4 |
| JADHAV ANIKET R. BAWALEKAR ABHISHEK A. NALAWADE AKSHAY B. KADAM RAJAT S. |
Prof. Pravin L. Jadhav | Kaizen Audit Process | Crane Process Ind. India Ltd., MIDC, Satara | July 2016- March 2017 | 4 |
| GAIKWAD ANNASO VITTHAL KHANDARE JAYESH SURESH PAWAR SUSHIL SANJAY SHITOLE AJINKYA RAJIV |
Prof. Amol B. Kharge | Manufacturing of tube notching machine | Savy fitness Pvt. Ltd. MIDC, Satara | July 2016- March 2017 | 4 |
| BALLAL RAHUL RAVINDRA JIRANGE AKSHAY ANIL SADAPHULE AKSHAY EKNATH TAWARE SOURABH SHIVAJI |
Prof. Kiran H. Sawant | Indexing mechanism for radial drilling machine | Kavitsu Transmission Pvt. Ltd. W-85 Addl. MIDC, Satara | July 2016- March 2017 | 4 |
| PATIL VAIBHAV N. NADAF SUMAIYYA S. NANEGAONKAR PRIYANKA MARALE SANGRAM S. MEENA KIRANKUMAR R. |
Prof. Jayant K. Nalawade | Scabbing defects of casting | Mutha Engineering unit 3 MIDC, Satara | July 2016- March 2017 | 4 |
| KAMBLE POOJA M. WAGHAMARE VIKAS P. BHISE ROHIT A. PAWAR ANIL LANGADE ABHISHEK |
Prof. Miss. Aparna P. Yadav | Use of innovation in designing press | Shree tools MIDC, Satara | July 2016- March 2017 | 4 |
| CHAVAN NITISH BABURAO JADHAV PRASAD BHIKAJI JADHAV PARAG RAJARAM JADHAV SWAPNIL SURYAKANT |
Prof.Mandave H.A. | Design & Manufacturing of Truck Mounted Containers Side Loader | Cyclo Transmission,Ltd,Satara | July 2016- March 2017 | 4 |
| BIRAMBOLE DAYANAND ASHOK MANE VIJAYKUMAR DAGADU TAYADE NIKESH JANRAO SAKALE ROHAN PRAKASH |
Prof.Jadhav V.D. | Quick Reversible Tapping Attachment | Nisaka Engg.Pvt.Ltd | July 2016- March 2017 | 4 |
| KHADE YUVRAJ DAULAT SAWANT SUSHANT BALASAHEB KAMBLE MAHESH MOHAN !AWALE SNEHALATA TANAJI |
Prof.Jadhav P.L. | Rolling Cutter attachment Blisters Cutting | Plastic & Packing Solution | July 2016- March 2017 | 4 |
| RAMAPURE DEVDHAR DILIP TIWADE VIKAS SANJAY SHINDE TRUSHAL ARJUN DESAI AKSHAY SHARAD |
Prof.Ghatge D.A. | Design & Development of Solar Tracking System | Innova Engg. | July 2016- March 2017 | 4 |
| PATIL VISHWAJIT ASHOK SONAVANE TEJAS DHANANYAY JADHAV ABHIJIT ASHOK !THORAWADE SIDDHESHWARI BHAGATSING |
Prof.Jadhav P.L. | Design & Development of Multi Spindle Drilling Head Attachment | Rajas Engg | July 2016- March 2017 | 4 |
| Mr. More Amar Shankar Ms. Wagh Koaml Hanmant Mr. Kale Yogesh Uttam Mr. Devde Atmaram Anadrao |
Prof.Patil S.S. | Egg Laying type concrete block making attachment | Balaji Construction m/c & Spares | July 2016- March 2017 | 4 |
| MANE JAYDEEP NANDKUMAR SHINDE VIKRANT SANJAY !MORE KIRAN BAPURAO BHATIYA DEVENDRA BRIJKISHORE |
Prof.Jadhav V.D. | Castor Wheel Endurance Testing Ring | Specialty Urethanes Pvt.Ltd | July 2016- March 2017 | 4 |
| KANASE SURAJ PRAMOD !GAJADHARANE MONIKA RAJENDRA !JOSHI MADHURA HEMANT GIJARE NIRANJAN AJAY |
Prof.Ghatge D.A. | Design & Development Non IBR Vertical fire tube Boiler | Yogesh Chemical Products | July 2016- March 2017 | 4 |
| PANDIT SHITAL KAILA MAYANE RANI GAJANAN LANGADE ABHISHEK DILIP BADBADE KAUSTUBH JITENDRA |
Prof. Patil Sharad | Brick Crushing Machine | Balaji Construction Machine and Spares | July 2016- March 2017 | 4 |